-
HR-2 Rack
- $50.00
- Pre-Freeze your food in your fridge to save time, money and wear on your machine. Plastic Tray Holders cannot slide liquids in without spilling them; nor can you remove a tray from the middle, without lifting the entire stack apart. 2" spacing holds Small and Medium Harvest Right trays & 3rd party half trays. Both Freezer & Oven safe. Shipping…
- Add to cart
-
HR-3 Rack
- $65.00
- Pre-Freeze your food in your fridge to save time, money and wear on your machine. Plastic Tray Holders cannot slide liquids in without spilling them; nor can you remove a tray from the middle, without lifting the entire stack apart. 2" spacing Size: 2"h x 8.5"w x 12"d, 1.5lbs Holds Small and Medium Harvest Right trays & 3rd party half trays.…
- Add to cart
-
HR-4 Rack
- $75.00
- Pre-Freeze your food in your fridge to save time, money and wear on your machine. Since 2016 this has been the classic HR-4 Rack. Plastic Tray Holders cannot slide liquids in without spilling them; nor can you remove a tray from the middle, without lifting the entire stack apart. With 2" spacing, Size: 6"h x 8.5"w x 12"d, 3lbs. Holds…
- Add to cart
-
HR-4 TS Rack
- $100.00
- Pre-Freeze your food in your fridge to save time, money and wear on your machine. HR-4 with a Top Shelf, allows you to leave the rack in your Fridge without moving or removing other food with this very handy upper top shelf. Plastic Tray Holders cannot slide liquids in without spilling them; nor can you remove a tray from the…
- Add to cart
-
HR-4 HD Rack
- $75.00
- Pre-Freeze your food in your fridge to save time, money and wear on your machine. This rack is shorter for smaller freezers. 1-1/8" high density spacing. Good for sauces and liquids. Plastic Tray Holders cannot slide liquids in without spilling them; nor can you remove a tray from the middle, without lifting the entire stack apart. Both Freezer & Oven safe.…
- Add to cart
-
HR-4 SE Rack
- $145.00
- Pre-Freeze your food in your fridge to save time, money and wear on your machine. This rack allows for side tray entry for refrigerators with top freezers. Plastic Tray Holders cannot slide liquids in without spilling them; nor can you remove a tray from the middle, without lifting the entire stack apart. Both Freezer & Oven safe. Holds Small, Medium…
- Add to cart
-
HR-4 / HD / TS Rack Kit
- $65.00 – $90.00
- Kit Instructions Assembly Required Stainless Steel: Hardware (screws) If you have a rivet gun select rivets Holds Small and Medium Harvest Right trays and 3rd party half trays. Both Freezer & Oven safe. International Customers Are Responsible For All Customs Fees.
- Select options
-
HR-4 Triple Wide
- $195.00
- This rack is for upright freezers. Holds 12 Med Harvest Right trays. Plastic Tray Holders cannot slide liquids in without spilling them; nor can you remove a tray from the middle, without lifting the entire stack apart. 2" high spacing to match freeze dryer. Both Freezer & Oven safe. Trays not included. Size: 6"h x 12"d x 24-5/8"w, 8.2lbs Shipping rates for…
- Add to cart
-
HR-5 Rack
- $180.00
- Pre-Freeze your food in your fridge to save time, money and wear on your machine. This rack allows for side tray entry for refrigerators with top freezers. Plastic Tray Holders cannot slide liquids in without spilling them; nor can you remove a tray from the middle, without lifting the entire stack apart. 2" high spacing to match freeze dryer. This…
- Add to cart
-
HR-6 Rack
- $220.00
- Built for the Large Pro Freeze Dryer. Pre-Freeze your food in your fridge to save time, money and wear on your machine. This rack allows for side tray entry for refrigerators with top freezers. Plastic Tray Holders cannot slide liquids in without spilling them; nor can you remove a tray from the middle, without lifting the entire stack apart. 1-5/8"…
- Add to cart
-
HR-4 CF & HR-5 CF Caddy
- $95.00 – $200.00
- Designed for Chest Freezers or use it as a Tray Caddy. Conveniently lower and raise your trays, without having to bend over so far, also reduces spilling. Handles are high off the floor of your chest freezer, with 4" wide neoprene padding for comfort.
- Select options
-
Tray Grates
- $18.00 – $20.00
- These are custom made professional stainless steel grates for the Harvest Right trays. They allow you to layer more food with nearly 100% ventilation. These grates can also be flipped over to help prevent food from sticking to the trays; or for meats with a little fat, which will keep the meat elevated from directly sitting on fat-laden paper towels.…
- Select options
-
Modular Moulds
- $29.00 – $150.00
- Create your own custom moulds to your desires. With slots on 1 inch centers, there is almost no limit to the creative variations you can achieve. Made from stainless steel, bacteria resistant and dish washer safe. Silicone Pucks waste a lot of tray space, these maximize every square inch of your tray. 1 Set is for 1 Full Tray (you can also…
- Select options
-
Cable Cooler
- $320.00 – $380.00
- The Cable Cooler has two functions; cools down hot wires and is also an external 'Relay Pump Controller'. Which allows you to run 2 (Sm, Med, Lg) Freeze Dryers on a HR Premier Pump, or up to 3 (Sm, Med, Lg or XL) Freeze Dryers with a Leybold Pump!!! The Cable Cooler will also protect your multi-thousand dollar investment with the…
- Select options
-
Roller Berry
- $30.00 – $265.00
- Custom built for the Harvest Right freeze drying process and handmade in the USA. This Patented multi-generational tool, carries an irrevocable guarantee against manufacture defects. This is the ideal tool for piercing fresh berries, for both freeze drying and dehydrating. No more tediously poking, cutting or smashing each berry. The long tapered blades easily pierce through fresh berries with speed,…
- Select options
-
Ice Guard & Rails 3.0
- $10.00 – $88.00
- The Ice Guard System has two elements and two functions. The side rails keep ice from flowing over and touching the lower shelf of the rack; which helps regulate temperature. As of Oct 2019, the covers are now thinner. Version 2.0 was .035", and version 3.0 are .016" (thinner than a fingernail). Designed to fit the newer Harvest Right drums. …
- Select options
-
Bag Racks
- $35.00 – $45.00
- This bag rack is perfect for standing your filled Harvest Right mylar bags upright. No more: spilling food, trying to lean them against a slippery counter top or in a drawer while you prepare to close them. Soft rubber feet protect your surfaces. NOT dishwasher safe. 4 Bag Rack: 4.5"h x 3.5"w x 12"d 5 Bag Rack: 4.5"h x 3.5"w x…
- Select options
-
EZ-Open Oil Cap
- $24.00 – $30.00
- Have you have ever tried to fill your pump's oil, only to realize you cannot unscrew the filler cap with your bare fingers? Frustrated, you head for the pliers. This also helps if the pump is hot. A stuck cap can happen from dirt, galvanic corrosion of dissimilar metals and temperature inversions. Frozen Right is proud to offer this custom…
- Select options
-
Dual Wrench
- $7.50
- This dual wrench fits both the Harvest Right 7CFM pumps with the Red Cap. It also fits the HR & JB pumps fitted with the brass oil cap (above) "EZ-Open Oil Cap", made by Frozen Right. Even with a thumb tab, some folks have physical limitations loosening their caps. Great for carpal tunnel, arthritic or large hands. It will not mare up your cap like pliers do.…
- Add to cart
-
JB-Drain 2.0
- $35.50
- Easy access to drain your oil. No more fighting the tight opening to loosen the drain valve, or spilling your oil. Allows your pump to drain easily into a jar from a shelf. Large shut off handle is perfect for large or arthritic hands. Fits J.B. Ind. Eliminator, Platinum and Harvest Right's (green label) 6 CFM pump (HR-6F-230-306). Not for use on Harvest Right's (green label) 7…
- Add to cart
-
HR 7CFM-Drain
- $36.00
- Easy access to drain your oil. No more dripping on the dangling cap, or spilling your oil. Allows your pump to drain easily into a jar from a shelf. Large shut off handle is perfect for large or arthritic hands. Fits Harvest Right's (green label) 7 CFM oil pump. No Teflon tape needed, simply finger tighten then gently snug with pliers. 7-1/4" Overall length International Customers…
- Add to cart
-
Betty’s Lid Opener
- $14.00
- Finally, a jar opener that uses the same turn key principle to open mason jars, as the vintage baby food jar openers from the 1950's. Insert the tip of the "B" opener, between the glass ridge and the lid, slide it to the right until it stops, twist opener and the vacuum will be released. The "B" opener will not…
- Add to cart
-
Tray Scoop 2.0
- $10.00
- Perfect for loading mylar bags or a blue funnel. This is a 'rock solid' stainless steel scoop, laser emblazoned with our logo. It has an open handle design; so Freeze Dried food dust does not get stuck, as seen on closed handle models. Rest knowing you can clean every spot. Side walls make gathering foods like corn & Skittles much easier, by not falling off. 6" w x…
- Add to cart
-
Tray Trowel 2.0
- $9.00
- This NEW wider stainless steel Tray Trowel, is the perfect tool for spreading sauce-like foods. Designed to ensure uniform freeze drying. It has two preset depth levels for making 3/8" and 1/2" layers. If pulled at a steep slope, your layer can be even thicker. It also has a handy hole for hanging. Trowel Size Chart
- Select options
-
Bag Filler 2.0
- $8.00 – $170.00
- This bag filler is what many of you have asked for. Hold your Harvest Right mylar bags open as you fill them. Will accommodate bags from 3" to 16" high. A heavy 1" thick base plate, will keep your bag upright no matter the food weight. It also has smooth jaw clips that firmly hold the mylar bag without marring it. …
- Select options
-
Funnel Rack 3.0
- $9.00 – $170.00
- This funnel rack, frees up your hands to hold your funnel above your Harvest Right mylar bags or fill your mason jars. Adjustable telescoping legs from 5" to 17" high. It has rubberized non-skid feet protect your work surface. The 10" ring holds a 10" blue funnel flat. Works well with our 'Bag Filler' & 'Funnel' sold separately in the pull down menu. New Leg Design. 2-5/8"…
- Select options
-
Tray Dividers
- $5.00 – $6.00
- 100% FDA food grade silicone tray dividers. Sold Individually, so 1 divider is 1 stick, not 4 sticks. This allows smaller portions of food to be separated on one Harvest Right tray. Great for leftovers and or preparing complete hiking meals. You custom cut them to fit your trays. 3/4"w x 3/4" h Use with Sm, Med, Lg or…
- Select options
-
Tray Guides
- $6.00 – $84.00
- These Tray Guides are designed to eliminate the tray from getting caught on the rear rack leg. This recurring irritation happened each time I slid a full tray into my Harvest Right Freeze Dryer. Thankfully not any more, a personal favorite, repeat smiles guaranteed. Works well with "Ice Guard" Rails, but not the Cover or Hose. Made from stainless steel…
- Select options
-
Dust Cover
- $35.00 – $45.00
- Our universal Dust Cover is Ideal for keeping your Harvest Right Freeze Dryer clean between uses. Made of a lightweight, yet very strong material. A zipper on the back rear corner and has plenty of material for quick covering and removal. Also allows you to store it with the door open. Designed for the newer Freeze Dryers with the…
- Select options
-
FR-Tool & Gasket Kits
- $180.00 – $292.00
- Allows the user to: tighten pump hose, open side panels on FD, open cover on pump, remove bolts inside the pump. Includes popular gaskets, sight glass, shaft coupler, extra feet & more for your Harvest Right freeze dryer. Tool Kit: Tool Bag (10" x 10" x 6.5", 4 lbs), Ratchet, Adjustable Wrench, 6" Extension, Hex Bit Sockets 1/8", 5/32", 3/16", Standard Sockets 7/16", 5/16". Gasket…
- Select options
-
JB-Splash Guard
- $15.00
- J.B. Splash Guard & Reed Valves This is a Stainless Steel food grade Splash Guard replacement for the J.B. Industries vacuum pumps. Over time rust and corrosion from water and ammonia (that blue liquid) will eventually corrode the factory guard. It includes the Stainless Steel bolts, for replacing the other internal ferrous bolts.
- Add to cart
-
HR 7CFM-Splash Guard
- $10.00
- This is a Stainless Steel food grade Splash Guard replacement for the Harvest Right 7 CFM (green label) oil vacuum pump. Over time rust and corrosion from water and ammonia (that blue liquid) will eventually corrode the factory guard. Simply remove the front cover and pull out the old galvanized steel guard, then slip in this stainless steel guard. It does not require any mounting bolts, it is…
- Add to cart
-
Oil Pitcher
- $12.00
- This pitcher is perfect for pre-loading your Harvest Right pump with clean oil to the exact level each time. Saves time and a spill mess, simply dump the entire pitcher without any guess work. The pitcher comes with graduated marks, however you can mark the outside with a marker or tape line to set your own line. Some pump oils have an odor, the two caps retain…
- Add to cart
-
A/C Power Cord Price: $15.00
- $15.00
- Does your 120 volt power cord get dangerously hot or show signs of melting? You Need a new Power Cord and a CABLE COOLER to prevent it from happening again. Periodical unplug the main cord on your Freeze Dryer and inspect the end of the cord for any melting (from some issue). Try this 6 foot heavy duty cable with…
- Add to cart
-
HR-Y2
- $5.00
- These two adapters are invaluable if you ever forgot to empty your drain bucket, then opened your valve only to have water rush into your Harvest Right Freeze Dryer. Thus ruining the entire batch with no way to remove the contaminated water. Two 'Y's prevent 100% of accidental water intrusion. The angle keeps water in your hose during a defrost mode. Does not fit "Stay Fresh" drain hoses. International Customers…
- Add to cart
-
Batch Notes
- $1.57
- These Post-It Pads are wonderful for keeping track of your batch times and future note taking. Sticks perfectly to the the Harvest Right freeze dryer door (100 sheets/pad, 3"w x 3"d ). It reminds you when your unit and pump started. That way you have an idea when it should stop. This is extremely helpful if you have multiple machines. It…
- Add to cart
-
Drip Kit
- $20.00
- Users who live in high humid areas, will see drops of water falling off the chamber, inside your Harvest Right freeze dryer. This of course can cause many problems, with both the computer and screen display. Use this kit to divert the water away into a drip tray. International Customers Are Responsible For All Customs Fees. Assembly Instructions
- Add to cart
-
FR – Gift Certificate
- $25.00 – $1,000.00
- Buy that someone special something special.
- Select options
-
Rush Fabrication
- $200.00
- Rush the fabrication of your order. If materials are in stock, Rush orders generally go out in 24 to 36 hours; if not in stock, this fee will be refunded to you. Regardless of our estimated lead time, the "Rush Fee" pushes your entire order to the top of the stack. Yes if needed, we will pause our facility for…
- Add to cart
-
Gift Wrap
- $50.00
- To ship to a different address: click the "Ship To A Different Address" box during checkout, add your recipient's information.
- Add to cart
-
Pay Frozen Right
- This is for users who need to pay for: an add on item, custom orders or shipping fees. International Customers: Please include your phone number in the description for Customs. International clients are 100% responsible for any import tariffs or taxes, a residential address is highly suggested.
- Choose price
