Frozen Right
Showing 17–32 of 45 results
This is a Stainless Steel food grade Splash Guard replacement for the Harvest Right 7 CFM (green label) oil vacuum pump. Over time rust and corrosion from water and ammonia (that blue liquid) will eventually corrode the factory guard. Simply remove the front cover and pull out the old galvanized steel guard, then slip in this stainless steel guard. It does not require any mounting bolts, it is a friction fit.
J.B. Splash Guard & Reed Valves
This is a Stainless Steel food grade Splash Guard replacement for the J.B. Industries vacuum pumps. Over time rust and corrosion from water and ammonia (that blue liquid) will eventually corrode the factory guard. Which includes the 9 Stainless Steel bolts, for replacing the other internal ferrous bolts.
This dual wrench fits both the Harvest Right 7CFM pumps with the Red Cap. It also fits the HR & JB pumps fitted with the brass oil cap (above) “EZ-Open Oil Cap”, made by Frozen Right.  Even with a thumb tab, some folks have physical limitations loosening their caps. Great for carpal tunnel, arthritic or large hands. It will not mare up your cap like pliers do.
6″ x 3/4″ Hangs conveniently on a nail or hook.
International Customers Are Responsible For All Customs Fees.
Have you have ever tried to fill your pump’s oil, only to realize you cannot unscrew the filler cap with your bare fingers? Frustrated, you head for the pliers.  This also helps if the pump is hot.  A stuck cap can happen from dirt, galvanic corrosion of dissimilar metals and temperature inversions. Frozen Right is proud to offer this custom made oil cap that is a breeze to open.  Great for large or arthritic hands. HR Cap fits all the Red Plastic oil caps for “HR 7 CFM” units. The JB Cap fits all J.B. Ind. pumps & “6 CFM” pumps from the Harvest Right freeze dryer.
International Customers Are Responsible For All Customs Fees.
Easy access to drain your oil.  No more dripping on the dangling cap, or spilling your oil.  Allows your pump to drain easily into a jar from a shelf. Large shut off handle is perfect for large or arthritic hands. Fits Harvest Right’s (green label) 7 CFM oil pump.
No Teflon tape needed, simply finger tighten then gently snug with pliers.
7-1/4″ Overall length
International Customers Are Responsible For All Customs Fees.
Easy access to drain your oil.  No more fighting the tight opening to loosen the drain valve, or spilling your oil.  Allows your pump to drain easily into a jar from a shelf. Large shut off handle is perfect for large or arthritic hands. Fits J.B. Ind. Eliminator, Platinum and Harvest Right’s (green label) 6 CFM pump (HR-6F-230-306).  Not for use on Harvest Right’s (green label) 7 CFM pump (see below).
6-3/8″ Overall length
International Customers Are Responsible For All Customs Fees.
This pitcher is perfect for pre-loading your Harvest Right pump with clean oil to the exact level each time. Saves time and a spill mess, simply dump the entire pitcher without any guess work. The pitcher comes with graduated marks, however you can mark the outside with a marker or tape line to set your own line.  Some pump oils have an odor, the two caps retain this smell. 32oz capacity.
International Customers Are Responsible For All Customs Fees.
Finally, a jar opener that uses the same turn key principle to open mason jars, as the vintage baby food jar openers from the 1950’s. Insert the tip of the “B” opener, between the glass ridge and the lid, slide it to the right until it stops, twist opener and the vacuum will be released. The “B” opener will not damage the flat lids so they can be reused to vacuum seal jars again. Designed for opening mason jars, it may also release the vacuum on other types of jars. Hangs perfectly on a nail or screw for instant access vs digging through a drawer. The large grip area allows for easy leverage, great for carpal tunnel, arthritic or large hands. This is a great addition to the kitchen, especially if you have challenges opening jars. This opener makes it extremely easy to open mason jars as well as some other lug lid jars.
These Tray Guides are designed to eliminate the tray from getting caught on the rear rack leg. This recurring irritation happened each time I slid a full tray into my Harvest Right Freeze Dryer. Thankfully not any more, a personal favorite, repeat smiles guaranteed. Works well with “Ice Guard” Rails, but not the Cover or Hose. Made from stainless steel with a brass knob (FD Sizes: Sm, Med, Lg, & XL). Â
100% FDA food grade silicone tray dividers. Sold Individually, so 1 divider is 1 stick, not 4 sticks. This allows smaller portions of food to be separated on one Harvest Right tray. Great for leftovers and or preparing complete hiking meals. Â
You custom cut them to fit your trays.  3/4″w x 3/4″ h
Use with Sm, Med, Lg or XL Trays.
International Customers Are Responsible For All Customs Fees.